Description
BUY TL0821 https://www.utsource.net/itm/p/12608919.html
| Parameter |
Min |
Typ |
Max |
Unit |
Description |
| Supply Voltage |
±4 |
- |
±18 |
V |
Operating supply voltage range |
| Input Offset Voltage |
- |
3 |
- |
mV |
Maximum input offset voltage at 25°C |
| Input Bias Current |
- |
60 |
- |
nA |
Typical input bias current at 25°C |
| Slew Rate |
- |
13 |
- |
V/μs |
Rate of change of output voltage per unit time |
| Bandwidth |
- |
3.5 |
- |
MHz |
Frequency at which the open-loop gain falls to unity |
| Output Swing |
- |
- |
±13 |
V |
Peak-to-peak output swing with respect to each supply rail |
| Power Consumption |
- |
- |
- |
mW |
Power consumption per operational amplifier |
Instructions for Use:
- Supply Voltage: Ensure that the supply voltage is within the specified range (±4V to ±18V). Exceeding these limits can damage the device.
- Input Signals: Keep input signals within the common-mode input voltage range to avoid distortion or damage.
- Power-On Sequence: Apply power carefully, ensuring both positive and negative supplies are stable before applying any input signals.
- Decoupling Capacitors: Place decoupling capacitors close to the power supply pins to minimize noise and transient effects.
- Output Load: Ensure the load connected to the output does not exceed the maximum output current capability of the device.
- Operating Temperature: Operate the device within its specified temperature range to ensure reliable performance.
- Handling Precautions: Handle the device with care to prevent electrostatic discharge (ESD) damage.
Note: The TL0821 is a JFET-input operational amplifier known for low input bias current and high slew rate, suitable for a variety of analog signal processing applications.
(For reference only)
More detail about Utsource Holding Company Limited
