GAL22V10B-10LP: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Value
Package Type	Package style	20-Pin PLCC
Operating Temperature	Range of temperatures where the device can operate reliably	-40°C to +85°C
Supply Voltage (VDD)	Recommended operating voltage	3.3V, 5V
Propagation Delay	Time delay for a signal to pass through the device	6ns (typical at VDD = 5V)
Power Dissipation	Maximum power dissipation	150mW
Input Leakage Current	Maximum current that flows into an input pin	±1μA
Output Drive Current	Maximum current that can be sourced or sunk by an output pin	±25mA
Storage Temperature	Temperature range for storing the device without damage	-65°C to +150°C
Mounting Type	Method of mounting on a PCB	Surface Mount

Handling Precautions: Use proper ESD protection when handling the GAL22V10B-10LP to avoid damage from static electricity.
Soldering: Ensure that soldering temperatures do not exceed the storage temperature limits. Follow standard reflow profiles for PLCC packages.
Power Supply: Connect the VDD pin to the appropriate supply voltage as specified in the table. Ensure stable power supply to prevent erratic behavior.
Decoupling Capacitors: Place decoupling capacitors close to the VDD and GND pins to minimize noise and ensure stable operation.
Signal Integrity: Keep signal traces as short as possible to reduce propagation delays and signal degradation.
Programming: Program the GAL22V10B-10LP using compatible programming hardware and software according to the manufacturer’s guidelines.

(For reference only)