RM50HG-12S: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Value
Part Number	Full part number identification	RM50HG-12S
Type	Type of component	Relay
Coil Voltage	Voltage required to energize the relay coil	12V DC
Coil Power	Power consumption of the relay coil	1.4W
Coil Resistance	Resistance of the relay coil	8.7Ω
Contact Form	Configuration of relay contacts	SPDT (Single Pole, Double Throw)
Contact Rating	Maximum current and voltage that can be switched by the contacts	10A, 250V AC
Insulation Resistance	Minimum resistance between non-adjacent parts	100MΩ at 250V DC
Dielectric Strength	Minimum voltage that can be applied without causing breakdown	2500V AC for 1 minute
Operating Temperature	Range of temperatures in which the relay can operate effectively	-40°C to +85°C
Storage Temperature	Range of temperatures in which the relay can be stored	-40°C to +85°C
Weight	Weight of the relay	30g
Dimensions	Physical dimensions of the relay	17.5mm x 12.5mm x 11.5mm

Installation: Ensure the relay is mounted on a stable surface. Avoid areas with excessive vibration or moisture.
Wiring: Connect the coil terminals to the appropriate power supply matching the coil voltage. Wire the contacts according to the circuit requirements.
Testing: Before operation, test the relay to ensure proper switching functionality. Use a multimeter to check continuity across the contacts.
Maintenance: Periodically inspect the relay for signs of wear or damage. Replace if any issues are found.
Handling: Handle with care to avoid damaging the internal components. Do not expose to extreme temperatures outside the operating range.
Disposal: Dispose of the relay according to local electronic waste regulations when it reaches the end of its life.

(For reference only)