PIC18F67K40T-I/PT
PIC18F67K40T-I/PT

 

PIC18F67K40T-I/PT

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY PIC18F67K40T-I/PT https://www.utsource.net/itm/p/12609217.html

Parameter Description Value/Options
Package Type The type of package used for the device. TQFP (44-pin)
Operating Voltage (Vdd) Range of supply voltage that can be applied to the device. 1.8V to 3.6V
Temperature Range Operating temperature range of the device. -40°C to +85°C
Program Memory Type Type of memory used for storing program instructions. Flash
Program Memory Size Size of the program memory available for storing code. 64KB
Data RAM Amount of data memory available for variable storage during execution. 4KB
EEPROM Data Memory Non-volatile memory for data retention when power is off. 2KB
Clock Speed Maximum frequency at which the microcontroller can operate. 32 MHz
ADC Channels Number of analog-to-digital converter channels. 16 channels
Comparator Channels Number of comparator channels available. 4 channels
Timers Number and type of timers available. 5 x 16-bit Timers
USART Modules Number of Universal Synchronous/Asynchronous Receiver/Transmitter modules. 2
SPI/I2C Modules Number of Serial Peripheral Interface and Inter-Integrated Circuit modules. 2 SPI, 2 I2C
CAN Modules Number of Controller Area Network modules. 1
USB Modules Number of Universal Serial Bus modules. 1
I/O Pins Total number of Input/Output pins available. 37
Brown-out Reset Feature that resets the device if the voltage drops below a certain level. Yes
Watchdog Timer Timer that resets the system if the main application fails to reset it. Yes

Instructions for Use:

  1. Power Supply: Ensure the operating voltage (Vdd) is within the specified range of 1.8V to 3.6V.
  2. Programming: Use a PIC programmer compatible with the PIC18F67K40T-I/PT to upload your firmware.
  3. Clock Configuration: Configure the internal or external oscillator as per your application requirements.
  4. Peripheral Setup: Initialize peripherals like ADC, comparators, timers, USART, SPI/I2C, CAN, and USB according to your project needs.
  5. Pin Configuration: Set up the I/O pins as input or output based on your application logic.
  6. Reset Conditions: Utilize the brown-out reset and watchdog timer features to ensure reliable operation under varying power conditions.
  7. Development Environment: Use MPLAB X IDE along with the XC8 compiler for writing and debugging code.
  8. Datasheet Reference: Always refer to the official Microchip datasheet for detailed specifications and advanced configurations.

This table and these instructions provide a concise overview of the key parameters and operational guidelines for the PIC18F67K40T-I/PT microcontroller.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag