BTS3160D: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Continuous Current	I_cont	V_DS = 12V, T_C = 70°C	-	60	-	A
Peak Current	I_peak	Pulse Width ≤ 1ms, Rep. Rate ≤ 2Hz	-	120	-	A
On-State Resistance	R_DS(on)	V_GS = 10V, I_D = 60A	3.5	-	4.5	mΩ
Gate Charge	Q_g	V_DS = 12V, I_D = 60A	-	80	-	nC
Input Capacitance	Ciss	V_DS = 12V	-	1800	-	pF
Output Capacitance	Coff	V_DS = 12V	-	450	-	pF
Switching Time (turn-on)	t_on	V_DS = 12V, I_D = 60A	-	90	-	ns
Switching Time (turn-off)	t_off	V_DS = 12V, I_D = 60A	-	50	-	ns
Thermal Resistance (Junction to Case)	R_thJC	-	-	0.6	-	°C/W

Mounting and Handling:
- Ensure proper heat sinking to manage thermal resistance.
- Handle with care to avoid damage to the pins and body.
Electrical Connections:
- Connect the drain (D) to the load or power supply.
- Connect the source (S) to the common ground.
- Apply gate voltage (G) relative to the source for switching.
Operating Conditions:
- Do not exceed the maximum continuous current of 60A.
- For peak currents up to 120A, ensure pulse width is ≤ 1ms and repetition rate is ≤ 2Hz.
Gate Drive:
- Apply a gate-source voltage of at least 10V to minimize on-state resistance.
- Keep gate drive impedance low to reduce switching times.
Thermal Management:
- Monitor junction temperature; keep it below 150°C to prevent overheating.
- Use adequate cooling solutions like heatsinks or forced air cooling.
Storage and Packaging:
- Store in a dry, cool place away from direct sunlight.
- Follow anti-static precautions during handling and storage.
Safety Precautions:
- Always use appropriate personal protective equipment when handling high-power components.
- Ensure all connections are secure to prevent electrical hazards.

(For reference only)