TLP184(GB-TPL: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Forward Voltage	VF	1.0	1.2	1.4	V	IF = 20 mA
Peak Forward Current	IFSM	-	1.0	-	A	t = 1 ms, Repetition Rate = 1/10 Cycles
Reverse Breakdown Voltage	VRRM	5	-	70	V	-
Reverse Current	IR	-	100	-	μA	VR = 5 V
Output Collector-Emitter Saturation Voltage	VCE(sat)	-	0.2	0.3	V	IC = 5 mA, IF = 5 mA
Output Collector Current	IC	-	5	-	mA	VCE = 5 V
Isolation Voltage	VIORM	-	2500	-	Vrms	1 min, 50/60 Hz

Mounting and Handling:
- Handle the device carefully to avoid damage to leads.
- Ensure proper alignment during mounting to prevent short circuits.
Power Supply Connection:
- Connect the forward current supply ensuring it does not exceed the peak forward current rating.
- Verify the reverse voltage applied does not surpass the reverse breakdown voltage limit.
Circuit Design Considerations:
- Ensure that the circuit design allows for sufficient heat dissipation if operating at high currents or voltages.
- Use appropriate decoupling capacitors near the power supply lines to reduce noise.
Testing:
- During testing, apply voltages and currents within specified limits to avoid damaging the device.
- Test the output collector-emitter saturation voltage under typical operating conditions to ensure correct operation.
Storage:
- Store in a dry, cool place away from direct sunlight.
- Keep in original packaging until ready to use to prevent static damage.
Safety Precautions:
- Always adhere to safety guidelines when working with electrical components.
- Use protective equipment such as gloves and goggles when handling electronic components.

(For reference only)