Description
BUY GA200SA60UP https://www.utsource.net/itm/p/12609872.html
| Parameter |
Description |
| Part Number |
GA200SA60UP |
| Type |
Inverter |
| Output Power |
200 W |
| Input Voltage Range |
18 VDC to 60 VDC |
| Output Voltage |
230 VAC (卤5%) |
| Frequency |
50/60 Hz (Selectable) |
| Efficiency |
Up to 90% |
| Protection Features |
Overload, short circuit, overvoltage, undervoltage, overheating protection |
| Operating Temperature |
-20掳C to +60掳C |
| Storage Temperature |
-40掳C to +85掳C |
| Humidity |
0% to 95% RH (non-condensing) |
| Dimensions (W x H x D) |
170 mm x 50 mm x 130 mm |
| Weight |
0.8 kg |
Instructions:
Installation:
- Ensure the inverter is installed in a well-ventilated area.
- Secure the unit using the mounting holes provided.
Connecting Input Power:
- Connect the DC input cables to the battery or power source ensuring correct polarity.
Connecting Load:
- Connect the AC output cables to the load device ensuring the inverter is switched off during connection.
Operation:
- Turn on the inverter by pressing the ON/OFF button.
- Select the desired frequency (50/60 Hz) using the selector switch if applicable.
Safety Precautions:
- Do not operate the inverter in environments with flammable gases or vapors.
- Avoid exposing the inverter to water or moisture.
- Disconnect the inverter from the power source before performing any maintenance or cleaning.
Troubleshooting:
- If the inverter fails to start, check the connections and ensure the input voltage is within the specified range.
- For persistent issues, refer to the detailed troubleshooting section in the user manual or contact technical support.
(For reference only)
More detail about Utsource Holding Company Limited
