Description
BUY JRC4741D https://www.utsource.net/itm/p/12610049.html
| Parameter |
Symbol |
Conditions |
Min |
Typ |
Max |
Unit |
| Supply Voltage |
Vcc |
|
-18 |
|
+18 |
V |
| Input Offset Voltage |
Vos |
|
-1 |
0 |
+1 |
mV |
| Input Bias Current |
Ib |
|
-50 |
|
+50 |
nA |
| Slew Rate |
SR |
|
0.3 |
|
|
V/渭s |
| Bandwidth |
f-3dB |
Small Signal |
|
2 |
|
MHz |
| Output Swing |
Vo(swing) |
RL = 2k惟, Vcc=卤15V |
-13 |
|
+13 |
V |
| Quiescent Current |
IQ |
Each Amplifier |
|
1.2 |
|
mA |
Instructions for JRC4741D:
Supply Voltage:
- Ensure the supply voltage is within the range of -18V to +18V to avoid damage to the device.
Input Signals:
- Keep input signals within the common-mode input voltage range to prevent distortion or damage.
- Use appropriate input biasing if necessary, especially for high impedance sources.
Output Configuration:
- The output can swing from -13V to +13V with a load resistance of 2k惟 when supplied with 卤15V. Adjust the load and supply as needed for your application.
Power-On Sequence:
- Apply power carefully, ensuring that the supply voltages are ramped up in a controlled manner to avoid transient conditions that could stress the device.
Thermal Considerations:
- Monitor the temperature of the device during operation. Ensure adequate heat dissipation if operating at higher currents or in hot environments.
Layout Recommendations:
- Place decoupling capacitors close to the power pins to minimize noise and improve stability.
- Maintain short signal paths and proper grounding to reduce interference.
Handling Precautions:
- The device is sensitive to electrostatic discharge (ESD). Handle with appropriate ESD precautions to prevent damage.
Storage:
- Store in a dry environment to prevent moisture-related issues.
This table and set of instructions provide a comprehensive overview for using the JRC4741D operational amplifier effectively.
(For reference only)
More detail about Utsource Holding Company Limited
