ADS1250-SMD-SOIC: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Value	Unit
Package Type	Surface Mount Device (SMD)	SOIC	-
Supply Voltage	Operating voltage range	2.7 to 5.5	V
Supply Current	Maximum supply current	1.0	mA
Input Channels	Number of differential input channels	8	-
Data Rate	Maximum data output rate	32	kSPS
Resolution	Bit resolution	24-bit	bits
Interface	Communication interface type	SPI	-
Temperature Range	Operating temperature range	-40 to +85	掳C
Package Pins	Number of pins in the package	24	-

Power Supply Connection:
- Connect the VDD pin to a power supply within the specified range (2.7V to 5.5V).
- Ensure that the GND pin is connected to the system ground.
Signal Input:
- Connect differential signals to the appropriate input channels (AIN0 to AIN7).
- Ensure that the input voltage does not exceed the supply voltage.
Communication Setup:
- Use the SPI interface for communication.
- Connect the CS, SCLK, DIN, and DOUT pins to the corresponding SPI lines on your microcontroller or processor.
Configuration:
- Set up the device using configuration registers via the SPI interface.
- Refer to the datasheet for specific register settings based on your application requirements.
Data Acquisition:
- Initiate conversions by writing to the control registers.
- Read conversion results from the data output register.
Operating Conditions:
- Operate the device within the specified temperature range (-40掳C to +85掳C) for reliable performance.
- Ensure adequate heat dissipation if operating at higher temperatures or under high load conditions.
Handling Precautions:
- Handle with care to avoid damage to the sensitive electronic components.
- Follow anti-static precautions during handling and installation.

For detailed information and advanced configurations, refer to the official datasheet provided by the manufacturer.

(For reference only)