PIC16F1829-I/SS

PIC16F1829-I/SS

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY PIC16F1829-I/SS https://www.utsource.net/itm/p/12610245.html

Parameter Description Value/Range
Package Type Type of packaging SSOP-20 (I/SS)
Operating Voltage Range of voltage under which the device can operate 1.8V to 5.5V
Operating Temperature Temperature range for reliable operation -40°C to +85°C
Program Memory Type Type of memory used for storing program instructions Flash
Program Memory Size Size of the program memory 8K x 14
Data RAM Amount of data memory available 384 x 8
EEPROM Data Memory Size of EEPROM for non-volatile data storage 256 x 8
Clock Speed Maximum speed at which the microcontroller can execute instructions 32 MHz
Analog-to-Digital Converter (ADC) Number and resolution of ADC channels 10-bit, 9 channels
Digital I/O Pins Number of digital input/output pins 18
Timers Number and type of timers 3 (TMR0, TMR1, TMR2)
Capture/Compare/PWM Number of capture/compare/PWM modules 2 CCP
USART Universal Synchronous Asynchronous Receiver Transmitter 1
SPI/I2C Serial Peripheral Interface / Inter-Integrated Circuit 1 MSSP module supporting SPI/I2C
MCLRE Pin Function Master Clear function Configurable
Watchdog Timer Watchdog timer functionality Yes
Brown-out Reset Brown-out reset functionality Yes
Low-Voltage Programming In-circuit serial programming capability Yes

Instructions:

  1. Power Supply: Ensure that the operating voltage is within the specified range (1.8V to 5.5V). Use appropriate decoupling capacitors near the power supply pins.
  2. Programming: The PIC16F1829 supports in-circuit serial programming (ICSP). Connect the ICSP interface correctly for programming and debugging.
  3. Oscillator Configuration: Configure the oscillator settings as per the application requirements using the configuration bits.
  4. Pin Configuration: Configure the I/O pins as inputs or outputs based on the application needs using TRIS registers.
  5. Peripheral Setup: Initialize peripherals like ADC, timers, and communication modules according to the datasheet guidelines.
  6. Interrupt Handling: Set up interrupt priorities and enable interrupts if required for efficient handling of asynchronous events.
  7. Power Management: Utilize sleep modes and watchdog timer for power management and system stability.
  8. Debugging: Use the debug features provided by the MPLAB X IDE for troubleshooting and testing the application code.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited