DS75176BN/NOPB: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating range	3.0		5.5	V
Output Data Rate	fODR			100	400	kbps
Differential Input Voltage	VID	High-level input	200			mV
Common-Mode Input Voltage	VICM		-7		12	V
Driver Output Current	IOZ	Short-circuit current			100	mA
Receiver Input Impedance	ZIN	Differential		80		Ω
Propagation Delay	tPD	Point-to-point		6.5		ns
Rise Time	tr			1.5		ns
Fall Time	tf			1.5		ns

Power Supply Requirements:
- Ensure the supply voltage (VCC) is within the specified operating range of 3.0V to 5.5V.
Data Transmission:
- The device supports data rates up to 400 kbps. Set the output data rate as required by your application.
Input Signal Levels:
- For reliable operation, ensure the differential input voltage (VID) is at least 200mV for high-level inputs.
- Keep the common-mode input voltage (VICM) within the range of -7V to +12V.
Driver and Receiver Operation:
- The driver can source or sink up to 100mA in short-circuit conditions.
- The receiver has a differential input impedance of approximately 80Ω.
Timing Considerations:
- The propagation delay (tPD) is typically 6.5ns for point-to-point configurations.
- Ensure rise time (tr) and fall time (tf) are around 1.5ns to maintain signal integrity.
Installation and Handling:
- Handle with care to avoid damage from electrostatic discharge (ESD).
- Follow standard surface-mount technology (SMT) procedures for installation.
Environmental Conditions:
- Store and operate the device within recommended temperature and humidity ranges to ensure reliability and longevity.

For detailed specifications and additional information, refer to the official datasheet provided by the manufacturer.

(For reference only)