Description
BUY MT48LC16M16A2B4-6A https://www.utsource.net/itm/p/12610322.html
| Parameter |
Description |
Value |
| Type |
Memory Type |
DDR SDRAM |
| Capacity |
Storage Capacity |
16 M x 16 bits |
| Organization |
Internal Banks |
4 banks |
| Voltage |
Supply Voltage (VDD) |
2.5V ± 0.2V |
| Voltage |
I/O Voltage (VDDQ) |
2.5V ± 0.2V |
| Speed |
Access Time (CL) |
CL=3 |
| Speed |
Cycle Time |
tCK=6ns |
| Package |
Package Type |
BGA-144 |
| Temperature |
Operating Temperature |
-40°C to +85°C |
| Data Rate |
Maximum Data Rate |
200 Mbps |
Instructions for Use:
Power Supply Requirements:
- Ensure that the supply voltage (VDD) and I/O voltage (VDDQ) are set to 2.5V ± 0.2V.
Signal Integrity:
- Proper termination and trace routing should be used to maintain signal integrity, especially for high-speed signals.
Initialization Sequence:
- Upon power-up or reset, the device must be initialized by performing a mode register set command followed by a precharge all command and then an all bank refresh command.
Operating Temperature:
- Operate within the temperature range of -40°C to +85°C to ensure reliable performance.
Timing Parameters:
- Adhere to the specified timing parameters such as access time (CL=3) and cycle time (tCK=6ns) to avoid data corruption.
Handling Precautions:
- Handle the BGA package with care to prevent damage to solder balls during installation.
Data Sheet Reference:
- Refer to the detailed datasheet for comprehensive information on advanced features, electrical characteristics, and application notes.
(For reference only)
More detail about Utsource Holding Company Limited
