Description
BUY MAX135CWI https://www.utsource.net/itm/p/12610342.html
| Parameter |
Symbol |
Conditions |
Min |
Typ |
Max |
Unit |
| Supply Voltage |
VCC |
Operating |
2.7 |
|
5.5 |
V |
| Input Voltage Range |
VIN |
Differential |
-0.3 |
|
2.4 |
V |
| Output Voltage Swing |
VOUT |
High Level (VCC = 5V) |
|
3.6 |
5.0 |
V |
|
VOUT |
Low Level (VCC = 5V) |
0 |
|
1.4 |
V |
| Input Bias Current |
IIN |
|
-1 |
|
1 |
μA |
| Power Dissipation |
PD |
Per Channel (VCC = 5V) |
|
90 |
|
mW |
| Operating Temperature |
Toper |
Commercial |
0 |
|
70 |
°C |
|
Toper |
Industrial |
-40 |
|
85 |
°C |
Instructions for MAX135CWI:
Power Supply Connection:
- Connect the VCC pin to a power supply within the range of 2.7V to 5.5V.
- Ensure that the GND pin is connected to the system ground.
Signal Input:
- Apply differential input signals within the range of -0.3V to +2.4V.
- Ensure input bias currents are kept within ±1μA to avoid distortion.
Output Configuration:
- For optimal performance, load resistances should be chosen based on the output voltage swing requirements.
- The output can swing from approximately 3.6V to 5.0V at high level and from 0V to 1.4V at low level when VCC is 5V.
Thermal Considerations:
- Monitor the operating temperature to ensure it stays within the specified range (-40°C to 85°C for industrial use, 0°C to 70°C for commercial use).
- Provide adequate heat sinking if operating near maximum power dissipation levels.
Installation:
- Place the device in a location with sufficient airflow or cooling mechanisms if necessary.
- Follow standard ESD precautions during handling and installation.
Testing:
- After installation, test the device under typical operating conditions to ensure proper functionality.
- Verify signal integrity and power consumption to meet design specifications.
(For reference only)
More detail about Utsource Holding Company Limited
