STP80NF10FP

STP80NF10FP

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY STP80NF10FP https://www.utsource.net/itm/p/12610343.html

Parameter Symbol Min Typ Max Unit Conditions
Drain-source on-resistance RDS(on) - 12.5 - VGS = 10V, ID = 8A
Gate-source threshold voltage VGS(th) 1.0 - 2.5 V ID = 1mA
Continuous drain current ID - - 80 A TC = 25°C
Power dissipation PD - - 76 W TC = 25°C, θJA = 62.5°C/W
Total gate charge QG - 35 - nC VDS = 100V, VGS = 10V, IDS = 40A
Input capacitance Ciss - 2000 - pF VDS = 10V
Output capacitance Coss - 450 - pF VDS = 10V
Reverse transfer capacitance Crss - 390 - pF VDS = 10V

Instructions for STP80NF10FP:

  1. Mounting and Handling:

    • Handle with care to avoid damage to the leads and body.
    • Ensure proper heat sinking for efficient heat dissipation.
  2. Electrical Connections:

    • Connect the source terminal to the power supply ground.
    • Connect the drain terminal to the load.
    • Apply a gate voltage (VGS) between 5V and 10V to turn the MOSFET on.
  3. Operating Temperature:

    • Ensure the ambient temperature is within the operating range (-55°C to +150°C).
    • Monitor the junction temperature (TJ) to not exceed the maximum allowable limit.
  4. Storage:

    • Store in a dry place away from direct sunlight.
    • Keep in original packaging until ready for use.
  5. Safety Precautions:

    • Avoid exceeding the maximum ratings to prevent device failure.
    • Use appropriate protective equipment when handling high voltages.
  6. Testing:

    • Test the device parameters using recommended test conditions to ensure reliable operation.
    • Perform continuity checks before applying power to the circuit.
(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited