Description
BUY TS80C32X2-MCA https://www.utsource.net/itm/p/12610359.html
| Parameter |
Description |
Value/Range |
| Device Name |
TS80C32X2-MCA |
- |
| Package Type |
Package type |
SOP-28 |
| Operating Voltage |
Supply voltage range |
4.5V to 5.5V |
| Clock Frequency |
Maximum clock frequency |
Up to 12 MHz |
| Flash Memory |
Program memory size |
32KB |
| RAM |
Data memory size |
256B + 960B XRAM |
| EEPROM |
EEPROM size |
256B |
| I/O Ports |
Number of I/O ports |
24 |
| Timer/Counters |
Number of timers/counters |
3 (T0, T1, T2) |
| Serial Interface |
UART interfaces |
1 |
| Watchdog Timer |
Watchdog timer available |
Yes |
| Interrupt Sources |
Number of interrupt sources |
14 |
| Power Consumption |
Active mode power consumption at 5V, 12MHz |
Typically 20mA |
| Operating Temperature |
Operating temperature range |
-40°C to +85°C |
Instructions for Use:
- Power Supply: Ensure the supply voltage is within the specified range of 4.5V to 5.5V to avoid damage or erratic behavior.
- Clock Configuration: Configure the external crystal oscillator or use the internal oscillator as per application requirements. The maximum supported frequency is 12 MHz.
- Program Upload: Use appropriate programming tools and software to upload code to the flash memory. Follow the manufacturer’s guidelines for ensuring successful uploads.
- Pin Configuration: Set up the I/O pins according to your hardware design. Refer to the datasheet for pin descriptions and configurations.
- Timer Setup: Initialize and configure the timers based on timing needs. Timers can be used for various tasks including delays and PWM generation.
- UART Communication: Configure the UART settings for serial communication. Ensure baud rates are set correctly for reliable data transmission.
- Watchdog Timer: Enable the watchdog timer in applications where it is critical to reset the microcontroller if it hangs or malfunctions.
- Interrupt Handling: Implement interrupt service routines (ISRs) for handling interrupts from various sources such as timers, UART, and I/O changes.
- Temperature Considerations: Operate the device within the specified temperature range to ensure reliable operation and longevity.
- Power Management: Implement power-saving modes like idle and power-down when not in active use to reduce power consumption.
For detailed information, refer to the official datasheet and application notes provided by the manufacturer.
(For reference only)
More detail about Utsource Holding Company Limited
