Description
BUY TPH1500CNH,L1Q https://www.utsource.net/itm/p/12610366.html
| Parameter |
Symbol |
Min |
Typ |
Max |
Unit |
Description |
| Input Voltage |
VIN |
4.5 |
|
20 |
V |
Operating input voltage range |
| Continuous Drain Current |
ID |
|
15 |
|
A |
Continuous drain current at 25°C |
| Peak Pulse Current |
IPP |
|
60 |
|
A |
Peak pulse current (10 μs, repetition rate 2%) |
| RDS(on) |
|
|
3.8 |
|
mΩ |
On-resistance at VGS = 10V |
| Gate Charge |
Qg |
|
17 |
|
nC |
Total gate charge |
| Switching Time |
tD |
|
9 |
|
ns |
Delay time |
| Switching Time |
tr |
|
9 |
|
ns |
Rise time |
| Switching Time |
tf |
|
9 |
|
ns |
Fall time |
| Thermal Resistance |
RθJC |
|
1.2 |
|
°C/W |
Junction-to-case thermal resistance |
Instructions for TPH1500CNH,L1Q:
Installation:
- Ensure the device is soldered onto a PCB with adequate heat dissipation.
- Verify correct orientation during installation to prevent damage.
Operating Conditions:
- Operate within the specified input voltage range (4.5V to 20V).
- Do not exceed the continuous drain current of 15A or peak pulse current of 60A to avoid overheating and potential failure.
Thermal Management:
- Maintain junction temperature within safe operating limits by ensuring proper heat sinking if necessary.
- Monitor thermal resistance to ensure efficient heat transfer from the junction to the case.
Switching Applications:
- Utilize the low RDS(on) value for minimal power loss in switching applications.
- Consider the total gate charge when designing drive circuits to optimize switching performance.
Handling Precautions:
- Handle with care to prevent electrostatic discharge (ESD) damage.
- Follow manufacturer guidelines for storage and handling to ensure reliability.
Testing:
- Test the device under controlled conditions before deployment in final applications.
- Validate switching times and other critical parameters to ensure compliance with design specifications.
(For reference only)
More detail about Utsource Holding Company Limited
