LT1088

BUY LT1088 https://www.utsource.net/itm/p/12610425.html

Instructions for Using LT1088

1. Input Voltage (VIN):

   • Ensure the input voltage is within the range of 2.7V to 40V.

2. Output Voltage (VOUT):

   • The output voltage can be set between 1.23V and 37V. Use appropriate resistors to set the desired output voltage.

3. Output Current (IOUT):

   • The device can provide a continuous output current up to 1.5A. Ensure that the load does not exceed this limit to avoid overheating or damage.

4. Quiescent Current (IQ):

   • The quiescent current is typically 2.6mA, which should be considered in low-power applications.

5. Dropout Voltage (VDROPOUT):

   • At full load (1.5A), the dropout voltage is typically 1.8V. Ensure sufficient headroom between VIN and VOUT.

6. Line Regulation:

   • The line regulation is very good, with changes less than 0.01% over the input voltage range from 5V to 40V.

7. Load Regulation:

   • The load regulation is also excellent, with changes less than 0.01% over the output current range from 0 to 1.5A.

8. Thermal Shutdown (TSD):

   • The device includes thermal shutdown protection, which activates at approximately 160°C to prevent damage from excessive heat.

9. Short-Circuit Protection:

   • The device provides short-circuit protection with a typical short-circuit current of 2.2A.

Ensure all connections are secure and follow proper PCB layout guidelines to achieve optimal performance. Always refer to the detailed datasheet for more specific application circuits and advanced configurations.