RTD2672: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating Range	2.7	-	5.5	V
Output Current	IOUT	Continuous	-	3.0	3.5	A
Efficiency	η	VIN = 5V, VOUT = 3.3V	85	90	93	%
Switching Frequency	fSW	Typical	-	1.5	-	MHz
Quiescent Current	IQ	VIN = 5V	-	20	40	μA
Load Transient Response	ΔVOUT	Load Step: 0A to 3A	-	50	100	mV
Line Regulation	ΔVOUT	VIN: 2.7V to 5.5V	-	5	10	mV
Output Voltage Range	VOUT	Adjustable	0.8	-	5.0	V

Power Supply Connection:
- Connect the input voltage (VIN) between 2.7V and 5.5V to the input pin.
- Ensure proper decoupling capacitors are placed close to the VIN and GND pins.
Output Configuration:
- Set the desired output voltage using the feedback resistors for adjustable configurations.
- For fixed output voltages, use the appropriate configuration as specified in the datasheet.
Thermal Considerations:
- Ensure adequate heat dissipation if operating at high load currents.
- Place the device on a PCB with sufficient copper area or heatsink if necessary.
Switching Frequency Adjustment:
- The switching frequency can be adjusted by an external resistor connected to the FREQ pin.
Protection Features:
- The device includes overcurrent protection, thermal shutdown, and undervoltage lockout (UVLO).
PCB Layout Recommendations:
- Keep the input and output capacitors as close as possible to the device.
- Use wide traces for power paths to minimize voltage drops and heating.
Testing and Troubleshooting:
- Verify all connections before applying power.
- Monitor output voltage stability under varying load conditions.
- Check for correct operation of protection features during testing.

(For reference only)