BP2833D: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage range
Output Current	IOUT	-	300	-	mA	Maximum output current
Quiescent Current	IQ	-	6	-	μA	Quiescent current
Dropout Voltage	VDROPOUT	-	300	-	mV	Typical dropout voltage at IOUT = 100mA
Shutdown Current	ISD	-	1	-	μA	Shutdown current
Operating Temp.	TOPR	-40	-	85	°C	Operating temperature range

Power Supply Connection:
- Connect the positive terminal of the power supply to the VDD pin and the negative terminal to GND.
Load Connection:
- Connect the load between the OUT pin and GND.
Enable/Shutdown Pin (EN):
- Apply a logic high (≥1.8V) to the EN pin to enable the regulator.
- Apply a logic low (≤0.4V) to the EN pin to put the device into shutdown mode, reducing power consumption.
Capacitor Placement:
- Place a 1μF ceramic capacitor between VDD and GND as close to the device as possible for stability.
- An additional 1μF capacitor between OUT and GND is recommended for optimal performance.
Thermal Considerations:
- Ensure adequate heat dissipation if operating at maximum load currents to avoid overheating.
PCB Layout:
- Keep traces short and wide to minimize inductance and resistance.
- Use ground planes to enhance thermal performance and reduce noise.
Storage and Handling:
- Store in a dry environment.
- Handle with care to avoid ESD damage; use proper ESD precautions.

(For reference only)