BUY TL082AC https://www.utsource.net/itm/p/12610537.html
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | ±5V to ±18V | - | V | ||
| Input Offset Voltage | VIO | VI+=VI-=0V, TA=25°C | 2 | 6 | 10 | mV |
| Input Bias Current | IB | VI+=VI-=0V, TA=25°C | 45 | 80 | 120 | nA |
| Input Offset Current | IOS | VI+=VI-=0V, TA=25°C | 5 | 15 | 30 | nA |
| Input Voltage Noise Density | en | f=1kHz | 18 | nV/√Hz | ||
| Slew Rate | SR | VO=±10V | 13 | V/μs | ||
| Large Signal Voltage Gain | AV | VO=±10V | 4 | MV/V | ||
| Output Short-Circuit Current | ISC | VCC=±15V | - | 25 | mA |
Supply Voltage: Ensure the supply voltage is within the specified range of ±5V to ±18V to avoid damage to the device.
Input Signals: Keep input signals within the common-mode input voltage range to prevent distortion and ensure proper operation.
Biasing and Offsets: Account for input bias current and offset voltage in your circuit design to minimize errors.
Noise Consideration: Be aware of the input voltage noise density when designing circuits that require low noise performance.
Slew Rate Limitations: Design your application considering the slew rate limitation to avoid signal distortion at high frequencies.
Gain Settings: Utilize the large signal voltage gain appropriately in your amplifier design.
Output Protection: Do not exceed the output short-circuit current limit to protect the operational amplifier from potential damage.
Operating Temperature: Ensure the ambient temperature is within the specified operating range for reliable performance.
Installation and Handling: Handle with care to avoid electrostatic discharge (ESD) damage and ensure correct pin orientation during installation.
