INA219AID SOIC-8: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Test Conditions	Min	Typical	Max	Unit
Supply Voltage	VDD		3.0		5.5	V
Operating Temperature	TOPR		-40		85	°C
Shutdown Current	ISD	VIN = 5V		0.1		μA
Quiescent Current	IQ	VIN = 5V, IOUT = 0mA		0.4		mA
Differential Input Voltage	VDIFF		±320			mV
Common-Mode Input Voltage	VCM		0		26.4	V
Bus Voltage Range	VB		0		26.4	V
Maximum Power Dissipation	PDISS	TA = 25°C			700	mW

Power Supply Connection:
- Connect the power supply to the VDD and GND pins. Ensure the supply voltage is within the specified range of 3.0V to 5.5V.
Bus Voltage Measurement:
- Connect the bus voltage (VB) to the VBUS pin. The common-mode input voltage can range from 0V to 26.4V.
Shunt Voltage Measurement:
- Connect the shunt resistor across the VSHUNT+ and VSHUNT- pins. The differential input voltage should not exceed ±320mV.
Configuration:
- Use the I2C interface to configure the device settings such as averaging, bus voltage range, and conversion time.
Shutdown Mode:
- To enter shutdown mode, set the appropriate bit in the configuration register. This reduces the current consumption to approximately 0.1μA.
Temperature Considerations:
- Ensure that the operating temperature remains between -40°C and 85°C to maintain performance specifications.
Power Dissipation:
- Keep the maximum power dissipation below 700mW to avoid overheating. Ensure adequate heat sinking if operating near this limit.
Handling Static Electricity:
- The device is sensitive to static electricity. Follow proper handling procedures to prevent damage.

Note: Always refer to the latest datasheet from the manufacturer for detailed information and updates.

(For reference only)