UPD71055GB: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	4.75	-	5.25	V
Output Current (High Level)	IOH	VCC = 5V, Ta = 25°C	-	-	10	mA
Output Current (Low Level)	IOL	VCC = 5V, Ta = 25°C	-	-	10	mA
Input Leakage Current	IIH, IIL	VIN = VCC or GND, Ta = 25°C	-	-	1	μA
Propagation Delay Time	tPLH, tPHL	VCC = 5V, Ta = 25°C, VOL=0.4V	-	10	-	ns
Power Dissipation	PD	Continuous	-	-	625	mW

Supply Voltage:
- Ensure the supply voltage is within the range of 4.75V to 5.25V for reliable operation.
Output Current:
- The device can source or sink up to 10mA per output pin. Do not exceed this limit to avoid damaging the device.
Input Leakage Current:
- Keep input leakage current below 1μA to maintain proper logic levels.
Propagation Delay:
- Typical propagation delay time is 10ns under standard conditions. Account for this delay in timing-sensitive applications.
Power Dissipation:
- The maximum power dissipation is 625mW. Ensure adequate heat dissipation if operating near this limit.
Operating Temperature:
- While not specified in the table, ensure the ambient temperature is within the operational range specified in the datasheet to prevent overheating.
Handling and Storage:
- Handle with care to avoid electrostatic discharge (ESD) damage. Store in an ESD-safe environment when not in use.
Circuit Design Considerations:
- Incorporate appropriate decoupling capacitors close to the power pins to minimize noise and improve stability.
- Ensure all unused inputs are tied to a defined logic level to prevent floating states which can lead to unpredictable behavior.

For detailed specifications and further information, refer to the official datasheet provided by the manufacturer.

(For reference only)