Description
BUY W83194R-58 https://www.utsource.net/itm/p/12610749.html
| Parameter |
Description |
| Part Number |
W83194R-58 |
| Type |
Temperature Sensor |
| Interface |
SMBus/I2C |
| Supply Voltage |
2.7V to 5.5V |
| Operating Temp |
-40掳C to +85掳C |
| Accuracy |
卤1掳C (from -10掳C to +65掳C) |
| Resolution |
0.0625掳C |
| Package |
SOIC-8 |
| Manufacturer |
Winbond Electronics |
Instructions:
- Power Supply Connection: Connect the VCC pin to a power supply between 2.7V and 5.5V and GND to ground.
- Communication Setup: Ensure that the SDA and SCL pins are connected to the I2C/SMBus lines of your microcontroller or system. Use appropriate pull-up resistors on the SDA and SCL lines.
- Address Configuration: Check the device address, which can be configured using the A0, A1, and A2 pins if available.
- Initialization: Initialize the sensor by sending the appropriate commands via the I2C interface as per the datasheet.
- Temperature Reading: Read temperature data from the designated registers using I2C read commands.
- Error Handling: Implement error checking and handling for I2C communication errors and out-of-range temperature readings.
- Power Management: Utilize the power-saving features like shutdown mode if supported by configuring the respective register bits.
For detailed programming and more advanced configurations, refer to the specific datasheet provided by Winbond Electronics.
(For reference only)
More detail about Utsource Holding Company Limited
