TPS3828-33DBVRG4: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	1.6	-	5.5	V
Input Voltage	VIN	Overvoltage threshold	-	3.3	-	V
Response Time	tr	Rising edge	-	200	-	μs
Output Type			-	Open-Drain	-
Leakage Current	ILK	VOUT = 0V, TJ = 25°C	-	1	-	μA
Operating Temperature	Toper		-40	-	125	°C
Storage Temperature	Tstg		-65	-	150	°C

Power Supply Connection:
- Connect the supply voltage (VDD) to the appropriate pin. Ensure the supply voltage is within the operating range of 1.6V to 5.5V.
Input Voltage Monitoring:
- The device monitors the input voltage (VIN). It triggers an overvoltage condition when VIN exceeds 3.3V.
Response Timing:
- The response time for detecting a rising edge on the input voltage is typically 200 microseconds. Ensure that any transient conditions are accounted for in system design.
Output Configuration:
- The output is open-drain. Therefore, an external pull-up resistor may be required depending on the application.
Leakage Current Consideration:
- At room temperature (TJ = 25°C), the leakage current should not exceed 1μA. This parameter is important for low-power applications.
Temperature Range:
- Ensure the device operates within the specified temperature range (-40°C to 125°C) for reliable performance. Storage temperature should also be considered if the device will be stored outside of operational periods.
Handling and Installation:
- Handle with care to avoid damage from electrostatic discharge (ESD). Follow standard practices for surface-mount technology (SMT) components during installation.
Compliance and Standards:
- Verify that the component meets all relevant compliance standards and certifications as per your application requirements.

(For reference only)