Description
BUY M5232P A1 https://www.utsource.net/itm/p/12610812.html
| Parameter |
Description |
| Part Number |
M5232P A1 |
| Type |
Microcontroller |
| Architecture |
16-bit microcontroller |
| Family |
M52000 Series |
| Core |
Hitachi H8/300H |
| Clock Speed |
Up to 16 MHz |
| Flash Memory |
32 KB |
| RAM |
2 KB |
| Data EEPROM |
256 bytes |
| I/O Pins |
49 pins |
| Operating Voltage |
2.7 V to 5.5 V |
| Temperature Range |
-40°C to +85°C |
| Package Type |
LQFP (Low-Profile Quad Flat Package) |
| Applications |
Consumer electronics, industrial control, automotive applications |
Instructions for Use:
- Power Supply: Ensure the operating voltage is within the specified range of 2.7 V to 5.5 V.
- Clock Configuration: Set up the clock source and frequency as required by your application, up to a maximum of 16 MHz.
- Programming: Use an appropriate programmer to load code into the flash memory. Refer to the datasheet for specific programming protocols.
- Pin Configuration: Configure I/O pins according to your circuit design. Refer to the pinout diagram in the datasheet.
- Reset Circuit: Design a reset circuit that can reliably bring the microcontroller out of reset when power is applied or when a reset signal is triggered.
- Debugging: Utilize debugging tools compatible with the H8/300H architecture for development and troubleshooting.
- Environmental Considerations: Operate the device within the temperature range of -40°C to +85°C to ensure reliable performance.
- Storage: Store in a dry environment and handle with care to prevent electrostatic discharge damage.
For detailed specifications and advanced configurations, refer to the official datasheet provided by the manufacturer.
(For reference only)
More detail about Utsource Holding Company Limited
