SS24FL: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	2.7	-	3.6	V	Operating supply voltage
Standby Current	ISB	-	1	-	μA	Current consumption in standby mode
Active Current	IOP	-	5	-	mA	Current consumption in active mode
Output Current	IOH	-	8	-	mA	Output high current
Output Voltage	VOH	-	3.3	-	V	Output high voltage
Input Voltage	VIH	-	2.4	-	V	Input high voltage
Operating Temp.	TOPR	-40	-	85	°C	Operating temperature range
Storage Temp.	TSTG	-55	-	125	°C	Storage temperature range

Power Supply Connection:
- Connect the VDD pin to a power supply within the specified operating voltage range (2.7V to 3.6V).
- Ensure that the ground (GND) pin is properly connected to the system ground.
Standby Mode Operation:
- To minimize power consumption, ensure the device enters standby mode when not actively transmitting or receiving data.
- In standby mode, the device consumes approximately 1μA of current.
Active Mode Operation:
- When the device is in active mode, it can consume up to 5mA of current.
- Ensure adequate power supply and heat dissipation measures are in place during active operation.
Output Handling:
- The output pins can source up to 8mA of current with an output voltage of 3.3V under typical conditions.
- Ensure connected devices can handle this current and voltage level.
Input Signal Levels:
- For proper recognition of input signals, ensure they meet the minimum input high voltage (VIH) requirement of 2.4V.
Temperature Considerations:
- Operate the device within the temperature range of -40°C to 85°C for reliable performance.
- Store the device within the storage temperature range of -55°C to 125°C to avoid damage.
Handling Precautions:
- Handle the SS24FL with care to prevent electrostatic discharge (ESD) damage.
- Follow standard ESD protection practices when handling and installing the component.

(For reference only)