TPS71501DCKT: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Min	Typ	Max	Unit
Input Voltage	Operating input voltage range	1.4	-	5.5	V
Output Voltage	Fixed output voltage	-	1.8	-	V
Output Current	Continuous output current	-	200	-	mA
Quiescent Current	Supply current at no load	-	37	-	μA
Dropout Voltage	Maximum dropout voltage at 200mA	-	260	-	mV
PSRR (1kHz)	Power supply rejection ratio at 1kHz	-	75	-	dB
Operating Temperature	Junction temperature range	-40	-	125	°C

Input Voltage Setup:
- Ensure the input voltage is within the specified range of 1.4V to 5.5V to avoid damage or improper operation.
Output Voltage Configuration:
- The device provides a fixed output voltage of 1.8V. No external components are required for setting this voltage.
Load Connection:
- Connect the load to the output terminals ensuring that the current does not exceed 200mA continuously.
Powering the Device:
- Apply power to the input pin, ensuring the polarity is correct to prevent damage to the device.
Thermal Considerations:
- Operate the device within the junction temperature range of -40°C to 125°C. Use proper heat sinking if necessary.
Bypass Capacitors:
- It is recommended to place a 0.1μF ceramic capacitor close to the input and output pins to reduce noise and improve stability.
Handling Electrostatic Discharge (ESD):
- Handle the device with care to avoid ESD damage. Use appropriate ESD protection measures during handling and assembly.
PCB Layout Recommendations:
- Keep the PCB traces short and wide to minimize inductance and resistance. Place bypass capacitors as close as possible to the device.

For detailed specifications and further instructions, refer to the official datasheet provided by Texas Instruments for the TPS71501DCKT.

(For reference only)