24FC64-I/SN: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Value
Part Number	Device identifier	24FC64-I/SN
Memory Size	Total memory capacity	64 Kbits
Organization	Memory organization	8192 x 8
Interface	Communication protocol	I2C
Operating Voltage (Vcc)	Supply voltage range	1.7V to 5.5V
Standby Current	Current consumption in standby mode	1 μA (max)
Active Current	Current consumption during active operation	3 mA (max)
Write Cycle Time	Time required for a write cycle	5 ms (max)
Page Write Size	Maximum number of bytes that can be written in a single page write command	8 bytes
Temperature Range	Operating temperature range	-40°C to 85°C
Package Type	Physical package type	SOIC-8

Power Supply:
- Connect Vcc to the supply voltage within the specified range (1.7V to 5.5V).
- Connect GND to the ground.
I2C Interface Configuration:
- Ensure SDA and SCL lines are connected to pull-up resistors.
- Set the device address according to the pin configuration if applicable.
Initialization:
- Initialize the I2C bus by setting up the master controller.
- Ensure the bus is idle before starting any transactions.
Read/Write Operations:
- For writing data, send the start condition, device address with write bit, memory address, and then the data byte(s).
- For reading data, send the start condition, device address with write bit, memory address, restart condition, device address with read bit, and then receive the data byte(s).
Handling Write Cycles:
- Respect the maximum write cycle time of 5 ms.
- Do not initiate a new write operation until the previous one has completed.
Page Writes:
- When performing page writes, ensure not to exceed 8 bytes per write command.
Temperature Considerations:
- Operate the device within the specified temperature range (-40°C to 85°C) to ensure reliable performance.
Storage Conditions:
- Store the device in a dry environment to prevent damage from moisture.

(For reference only)