PIC16F1513-E/SO: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	PIC16F1513-E/SO Specifications
Package Type	Package format	SOIC (Small Outline Integrated Circuit)
Pin Count	Number of pins	14
Operating Voltage	Supply voltage range	2.0V to 5.5V
Operating Temperature	Temperature range for operation	-40°C to +85°C
Program Memory Size	Size of program memory	7K x 14
Data RAM	Size of data memory	256B
EEPROM	Size of EEPROM memory	256B
Clock Speed	Maximum clock frequency	32 MHz
I/O Pins	Number of I/O pins	11
Analog-to-Digital Channels (ADC)	Number of ADC channels	10-bit, up to 8 channels
Timers	Number and type of timers	3 x 8/16-bit Timers
Comparator Modules	Number of comparator modules	2
USART Module	Universal Synchronous Asynchronous Receiver Transmitter	1
SPI/I2C Module	Serial Peripheral Interface / Inter-Integrated Circuit	1
Brown-out Reset (BOR)	Feature to reset the device when supply voltage drops below a threshold	Yes
Watchdog Timer (WDT)	Timer to reset the device if it hangs	Yes
Low-Voltage Programming (LVP)	Capability to be programmed at low voltages	Yes

Power Supply: Ensure the operating voltage is within the specified range (2.0V to 5.5V). Connect VDD to the positive supply and VSS to ground.
Programming: The device supports Low-Voltage Programming (LVP). Use a suitable programmer compatible with the PIC16F1513-E/SO.
Clock Configuration: Configure the internal oscillator or connect an external crystal/clock source based on your application needs.
Reset Pin: Connect a pull-up resistor to the MCLR pin if using external reset functionality.
Analog Inputs: For ADC channels, ensure analog inputs are connected to appropriate pins and configure the ADC module via software.
Digital I/O: Configure digital I/O pins as input or output in your code. Use built-in pull-ups where necessary.
Peripheral Modules: Initialize and configure peripherals like USART, SPI/I2C, and comparators according to your application requirements.
Power-On Reset (POR): Ensure proper power sequencing to utilize POR effectively.
Brown-Out Reset (BOR): Adjust BOR settings in the configuration bits to protect against low-voltage conditions.
Watchdog Timer (WDT): Enable and set WDT intervals to prevent software lockups.

For detailed programming instructions and specific register configurations, refer to the official Microchip datasheet for the PIC16F1513-E/SO.

(For reference only)