EL2033CN: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Value
Device Type	A high-performance, low-power microcontroller	-
Package Type	Package type	DIP-8
Operating Voltage	Supply voltage range	2.0V to 5.5V
Operating Current	Maximum operating current	10mA
Temperature Range	Operating temperature range	-40°C to 85°C
Clock Frequency	Maximum clock frequency	20MHz
Flash Memory	Size of flash memory	32KB
RAM	Size of RAM	4KB
EEPROM	Size of EEPROM	256 Bytes
I/O Pins	Number of I/O pins	20
Timers	Number of timers	2
ADC Channels	Number of ADC channels	8
Communication Interfaces	Supported communication interfaces	UART, SPI, I2C

Power Supply Setup
- Connect the Vcc pin to a power supply within the operating voltage range (2.0V to 5.5V).
- Ensure the GND pin is properly grounded.
Clock Configuration
- Use an external crystal or oscillator if needed, or configure the internal oscillator.
- Set the clock frequency according to your application requirements (up to 20MHz).
Programming
- Use an in-circuit programmer compatible with the device.
- Write your program code into the flash memory using appropriate development tools.
Pin Configuration
- Configure I/O pins as inputs or outputs based on your application needs.
- Utilize pull-up or pull-down resistors as necessary for stable operation.
Peripheral Setup
- Initialize and configure peripherals such as timers, ADCs, and communication interfaces.
- Refer to the datasheet for specific register settings.
Testing
- After setup, test the device under various conditions to ensure stability and correct operation.
- Monitor power consumption and adjust settings for optimal performance.
Storage and Handling
- Store in a dry environment when not in use.
- Handle with care to avoid static damage; use anti-static precautions.

For detailed information and specific configurations, refer to the official datasheet provided by the manufacturer.

(For reference only)