TC1044SEOA713

BUY TC1044SEOA713 https://www.utsource.net/itm/p/12610953.html

Instructions for Use:

1. Input Voltage (V_IN):

   • Ensure the input voltage is within the range of 1.8V to 5.5V.
   • The input voltage must be higher than the output voltage plus the dropout voltage.

2. Output Voltage (V_OUT):

   • The TC1044SEOA713 provides a fixed output voltage of 3.3V.
   • No external components are required for setting the output voltage.

3. Output Current (I_OUT):

   • The device can supply up to 200mA continuously.
   • Avoid exceeding this limit to prevent damage or overheating.

4. Quiescent Current (I_Q):

   • At no load and with an input voltage of 5V, the quiescent current is typically 10μA.
   • This low quiescent current helps in efficient power usage.

5. Dropout Voltage (V_DROPOUT):

   • With an output current of 100mA and an input voltage of 3.6V, the dropout voltage is typically 270mV.
   • Keep the input voltage sufficiently higher than the output voltage to ensure proper regulation.

6. Power Supply Rejection Ratio (PSRR):

   • At 120Hz and an input voltage of 5V, the PSRR is typically 70dB.
   • This indicates good rejection of ripple from the input voltage.

7. Thermal Shutdown:

   • The device has thermal protection that activates at approximately 160°C.
   • Ensure adequate heat dissipation to prevent reaching this temperature.

8. Operating Temperature (T_OP):

   • The operating junction temperature range is from -40°C to 85°C.
   • Ensure the device operates within this temperature range for reliable performance.

9. Installation and Layout:

   • Place the regulator close to the load to minimize trace resistance.
   • Use bypass capacitors on both input and output sides as recommended by the manufacturer for stability and noise reduction.

10. Handling Precautions:

    • Handle the device with care to avoid ESD damage.
    • Follow standard precautions for handling electronic components.