UPC7915H: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.5	-	5.5	V
Input Voltage Range	Vin	Operating	0	-	Vcc	V
Output Voltage Range	Vout	Operating	0	-	Vcc	V
Quiescent Current	IQ	Vcc = 5V	-	10	-	μA
Maximum Output Current	Iout	Vcc = 5V, Ta = 25°C	-	100	-	mA
Power Dissipation	PD	Ta = 25°C	-	300	-	mW
Operating Temperature	Topr	Storage	-40	-	85	°C

Power Supply Connection:
- Connect the Vcc pin to a power supply within the specified range (4.5V to 5.5V).
- Ensure proper decoupling capacitors are placed close to the Vcc and GND pins to maintain stability.
Input Signal:
- Apply input signals within the allowed voltage range (0V to Vcc). Exceeding this range can damage the device.
Output Configuration:
- The output can drive loads up to the maximum current rating (typically 100mA at 25°C). Ensure the load does not exceed this limit to avoid overheating or damage.
Thermal Considerations:
- Keep the operating temperature within the specified range (-40°C to 85°C). Use heat sinks if necessary when operating near the upper temperature limit or under high load conditions.
Handling Precautions:
- Handle with care to avoid electrostatic discharge (ESD) damage. Use appropriate ESD protection measures during handling and installation.
Storage:
- Store in a dry, cool place away from direct sunlight and corrosive materials. Follow recommended storage temperature guidelines.
Testing:
- Before integrating into a circuit, test the device using a known good setup to ensure functionality. Verify all connections and parameters according to the datasheet specifications.

(For reference only)