SN65HVD234DR SOIC8: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	3.0	-	5.5	V
Driver Input Voltage	Vin	High Level	2.0	-	Vcc	V
Driver Input Voltage	Vin	Low Level	0	-	0.8	V
Output Short-Circuit	Ios	±40mA	-	-	±40	mA
Differential Output	Vod	Voltage (Driver to Driver)	-	1.0	-	V
Propagation Delay Time	tpd	Typical	-	45	-	ns
Skew	tskew	Between Outputs	-	25	-	ns
Operating Temperature	Topr	Range	-40	-	125	°C

Power Supply Connection:
- Connect the supply voltage (Vcc) pin to a stable power source between 3.0V and 5.5V.
- Ensure proper decoupling capacitors are placed close to the Vcc pin to stabilize the supply.
Signal Inputs:
- Apply logic signals to the driver input pins within the specified voltage range for high and low levels.
- Ensure signal integrity by minimizing noise and maintaining clean, sharp transitions.
Output Handling:
- The differential outputs can withstand short-circuits up to ±40mA.
- Verify that the load connected to the outputs does not exceed this current limit.
Timing Considerations:
- Account for the propagation delay of 45ns in your system timing calculations.
- Ensure that skew between outputs is considered if precise timing synchronization is required.
Thermal Management:
- Operate the device within the temperature range of -40°C to +125°C.
- Provide adequate heat dissipation if operating at higher temperatures or under heavy loads.
Mounting and Layout:
- Follow recommended PCB layout guidelines for optimal performance.
- Ensure proper grounding and shielding to minimize electromagnetic interference (EMI).
Storage and Handling:
- Store in a dry environment to prevent moisture damage.
- Handle with care to avoid static discharge which can damage the component.

(For reference only)