BUY EEH-ZA1V470P https://www.utsource.net/itm/p/12611107.html
| Parameter | Value | Unit |
|---|---|---|
| Part Number | EEH-ZA1V470P | - |
| Manufacturer | EPCOS (TDK) | - |
| Type | NTC Thermistor | - |
| Resistance at 25°C | 470 | kΩ |
| Beta Value (25/85°C) | 3980 | K |
| Operating Temperature | -40 to 125 | °C |
| Dissipation Constant | 1.6 | mW/°C |
| Thermal Time Constant | 12 | s |
| Max Power Rating | 120 | mW |
| Package/Case | Radial, Disk | - |
| Tolerance | ±1% | % |
Installation: Ensure that the EEH-ZA1V470P is installed in a location where it can accurately sense the temperature of the intended environment or component. Avoid areas with high electromagnetic interference.
Handling: Handle the thermistor with care to avoid damaging the leads or body. Use appropriate soldering techniques to ensure reliable connections.
Operating Conditions: Operate within the specified temperature range (-40°C to 125°C). Exposure to temperatures outside this range may affect performance and longevity.
Power Rating: Do not exceed the maximum power rating of 120 mW to prevent damage or degradation of the thermistor.
Measurement: For accurate resistance measurements, use a quality multimeter suitable for measuring high resistances. Ensure the measurement does not introduce excessive current which could heat the thermistor and alter its resistance.
Calibration: If necessary, calibrate using the beta value and resistance at 25°C as reference points. Adjustments should be made according to specific application requirements.
Storage: Store in a dry, cool place away from direct sunlight and sources of heat or moisture to maintain performance characteristics.
