BUY NJM4558SD https://www.utsource.net/itm/p/12611156.html
| Parameter | Specifications |
|---|---|
| Operating Supply Voltage | ±1.5V to ±18V (Total 3V to 36V) |
| Operating Temperature | -25°C to +85°C |
| Input Offset Voltage | 5mV (Typical at Ta=25°C) |
| Input Bias Current | 40nA (Typical at Ta=25°C) |
| Input Offset Current | 10nA (Typical at Ta=25°C) |
| Slew Rate | 0.5V/μs (Typical at Ta=25°C) |
| Output Voltage Swing | ±13.5V (With VCC± = ±15V, RL=10kΩ) |
| Supply Current | 2.7mA (Typical at Ta=25°C) |
| Common Mode Rejection Ratio | 86dB (Minimum at Ta=25°C) |
| Power Supply Rejection Ratio | 80dB (Minimum at Ta=25°C, f=120Hz) |
Power Supply: Ensure the supply voltage is within the specified range of ±1.5V to ±18V. The device can operate on a single or dual power supply.
Temperature Considerations: Operate the device within the temperature range of -25°C to +85°C to ensure reliable performance.
Input Signals: Be mindful of the input offset voltage and bias current characteristics to avoid signal distortion.
Output Load: For optimal output voltage swing, connect a load resistance of 10kΩ when using ±15V supply.
Stability and Performance: To achieve the best performance, consider the slew rate and common mode rejection ratio in your circuit design.
Installation: Ensure proper grounding and decoupling capacitors are used near the power supply pins to minimize noise and improve stability.
Handling Precautions: Handle the NJM4558SD with care to prevent damage from electrostatic discharge (ESD).
