Description
BUY TLE2062C https://www.utsource.net/itm/p/12611164.html
| Parameter |
Symbol |
Conditions |
Min |
Typ |
Max |
Unit |
| Supply Voltage |
VCC |
|
2.7 |
|
5.5 |
V |
| Input Offset Voltage |
VIO |
VCC=5V, TA=25°C |
-0.4 |
0.1 |
0.4 |
mV |
| Input Bias Current |
IB |
VCC=5V, TA=25°C |
-50 |
1 |
50 |
nA |
| Input Offset Current |
IIO |
VCC=5V, TA=25°C |
-20 |
0.5 |
20 |
nA |
| Open Loop Gain |
AVOL |
VCC=5V, TA=25°C |
100 |
300 |
500 |
kV/V |
| Slew Rate |
SR |
VCC=5V, TA=25°C |
0.5 |
|
1 |
V/μs |
| Bandwidth |
fT |
VCC=5V, TA=25°C |
1 |
1.6 |
2.5 |
MHz |
| Output Short-Circuit Duration |
tSC |
Continuous |
|
|
|
s |
Instructions for Using TLE2062C:
Power Supply:
- Ensure the supply voltage (VCC) is within the specified range of 2.7V to 5.5V.
Input Signals:
- Keep input voltages within the common-mode input voltage range to avoid damage or incorrect operation.
Biasing and Decoupling:
- Use appropriate decoupling capacitors near the power supply pins to stabilize the device and reduce noise.
Output Load:
- The output can drive loads directly but should not be short-circuited for extended periods.
Operating Temperature:
- Ensure the ambient temperature (TA) remains within the operational limits specified by the manufacturer.
Handling Precautions:
- Handle with care to prevent electrostatic discharge (ESD) damage; use proper ESD protection measures.
Mounting and Layout:
- Follow recommended PCB layout guidelines to ensure optimal performance and reliability.
Testing:
- When testing, apply typical operating conditions as closely as possible to those in actual use for accurate results.
(For reference only)
More detail about Utsource Holding Company Limited
