MX25R3235FZNIL0: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	1.7	-	3.6	V
Data Output High Level	VOH	Vcc = 3.6V, IOH=0.4mA	2.4	-	3.6	V
Data Output Low Level	VOL	Vcc = 3.6V, IOL=8mA	0	-	0.4	V
Input Leakage Current	IIH/IL	Vcc = 3.6V	-	-	±1	μA
Active Current	IDD	Read Mode	-	35	-	mA
Standby Current	ISB	Vcc = 3.6V	-	1	-	μA
Write Enable Latch	WEL		-	-	-	-
Power Down Mode	PD	Deep Power Down	-	0.1	-	μA
Program Time	TPW	Page Program	3	-	-	ms
Sector Erase Time	TSE		300	-	-	ms
Bulk Erase Time	TBE		2000	-	-	ms

Power Supply:
- Ensure the supply voltage (Vcc) is within the operating range of 1.7V to 3.6V.
Signal Levels:
- The data output high level (VOH) should be at least 2.4V when Vcc is 3.6V and the output current is 0.4mA.
- The data output low level (VOL) should not exceed 0.4V under a load current of 8mA.
Current Management:
- Monitor active current (IDD) during read operations, which typically consumes around 35mA.
- In standby mode, the device draws approximately 1μA.
- During deep power-down mode, the current consumption drops to about 0.1μA.
Write Operations:
- Before programming or erasing, set the Write Enable Latch (WEL).
- A page program operation takes approximately 3ms.
- A sector erase operation requires about 300ms.
- A bulk erase operation will take around 2000ms.
Handling:
- Be cautious with input leakage currents; they should remain within ±1μA at 3.6V.
- Follow all timing parameters closely to ensure reliable operation.
Programming:
- Use appropriate commands for write enable, page program, sector erase, and bulk erase as per the datasheet specifications.

For detailed command sequences and more comprehensive instructions, refer to the official datasheet provided by the manufacturer.

(For reference only)