Description
BUY AM8530H-8JC https://www.utsource.net/itm/p/12611208.html
| Parameter |
Description |
Value |
| Part Number |
AM8530H-8JC |
|
| Type |
CMOS 8-Bit Microcontroller |
|
| Package |
QFN (Quad Flat No-leads) |
48-Pin |
| Operating Voltage |
Supply Voltage Range |
2.7V to 5.5V |
| Clock Speed |
Maximum Frequency |
24 MHz |
| Flash Memory |
Program Memory Size |
32 KB |
| RAM |
Data Memory Size |
2 KB |
| EEPROM |
Available EEPROM Size |
N/A |
| ADC Channels |
Analog-to-Digital Converter Channels |
10-bit, 8 channels |
| Timers |
Number of Timers |
5 |
| UART Interfaces |
Universal Asynchronous Receiver/Transmitter |
2 |
| I2C Interfaces |
Inter-Integrated Circuit |
1 |
| SPI Interfaces |
Serial Peripheral Interface |
1 |
| Operating Temp. |
Temperature Range for Operation |
-40°C to +85°C |
| Pin Count |
Number of Pins |
48 |
Instructions for Use:
- Power Supply: Ensure the supply voltage is within the specified range (2.7V to 5.5V). Connect the VCC pin to the power source and GND pin to ground.
- Clock Configuration: Configure the clock source as per your application needs. The device supports both internal and external oscillators up to 24 MHz.
- Flash Programming: Use an appropriate programmer or development environment that supports the AM8530H-8JC to write code into the flash memory.
- Peripheral Setup: Initialize peripherals such as ADC, UART, I2C, and SPI according to the requirements of your application.
- Pin Configuration: Configure GPIO pins based on the functionality required in your project.
- Operating Environment: Operate the microcontroller within the specified temperature range to ensure reliable performance.
- Development Tools: Utilize available IDEs and development kits designed for this microcontroller for easier development and debugging.
For detailed information, refer to the datasheet and application notes provided by the manufacturer.
(For reference only)
More detail about Utsource Holding Company Limited
