RT6903BZQV

BUY RT6903BZQV https://www.utsource.net/itm/p/12611244.html

Instructions for RT6903BZQV

1. Power Supply Connection:

   • Connect the input voltage (VIN) between 2.5V and 5.5V to the IN pin.
   • Ensure proper bypassing with a capacitor (e.g., 1μF ceramic) close to the IN pin.

2. Output Voltage Setting:

   • The output voltage can be adjusted using external resistors connected to the FB pin. Refer to the datasheet for specific resistor values based on desired output voltage.

3. Ground Connection:

   • Ensure a solid ground connection for both input and output capacitors as well as the GND pin of the device.

4. Load Considerations:

   • The device can supply up to 300mA. For higher currents, ensure adequate heat sinking or consider a different regulator.

5. Thermal Management:

   • Operate within the specified temperature range (-40°C to 85°C). Use a heatsink if operating at high temperatures or under high load conditions.

6. Stability:

   • Use output capacitors with ESR in the recommended range to ensure stability. A typical value is 1μF to 10μF ceramic capacitor.

7. Protection Features:

   • The device includes overcurrent and thermal shutdown protection. Verify these features are suitable for your application.

8. Layout Recommendations:

   • Keep the PCB layout compact, minimizing trace lengths between the regulator and its capacitors to reduce noise and improve transient response.