Description
BUY AZ8-1CH-24DSE https://www.utsource.net/itm/p/12611265.html
| Parameter |
Description |
| Part Number |
AZ8-1CH-24DSE |
| Type |
Relay Module |
| Input Voltage |
24V DC |
| Coil Power Consumption |
0.5W (nominal) |
| Contact Form |
SPDT (Single Pole Double Throw) |
| Switching Voltage |
Max 250V AC / 30V DC |
| Switching Current |
Max 10A |
| Insulation Resistance |
>100MΩ at 500V DC |
| Dielectric Strength |
2500V AC for 1 minute |
| Mechanical Life |
10 million operations |
| Electrical Life |
100,000 operations (resistive load) |
| Operating Temperature |
-40°C to +85°C |
| Storage Temperature |
-40°C to +85°C |
| Humidity Range |
5% to 95% RH (non-condensing) |
| Dimensions |
37mm x 22mm x 26mm |
| Weight |
Approx. 50g |
| Mounting |
PCB mount or panel mount |
| Certifications |
CE, UL |
Instructions:
Installation:
- Ensure the relay is installed in a well-ventilated area within specified temperature and humidity ranges.
- Securely mount the relay using recommended mounting methods.
Wiring:
- Connect the control circuit to the coil terminals ensuring the correct polarity.
- Wire the load to the common (COM), normally open (NO), and normally closed (NC) contacts as required by your application.
Operation:
- Apply the rated input voltage to energize the coil, which will switch the contacts.
- Verify that the switching capacity of the relay matches the load requirements to avoid damage.
Maintenance:
- Regularly inspect the relay for signs of wear or damage.
- Ensure connections are tight and free from corrosion.
Safety Precautions:
- Do not exceed the maximum switching voltage and current ratings.
- Handle with care to prevent mechanical damage.
- Disconnect power before performing any maintenance or installation tasks.
(For reference only)
More detail about Utsource Holding Company Limited
