Description
BUY PIC16F1825T-I/ST https://www.utsource.net/itm/p/12611269.html
| Parameter |
Description |
| Package Type |
SOIC (Small Outline Integrated Circuit) |
| Pin Count |
14 |
| Operating Voltage |
2.0V to 5.5V |
| Temperature Range |
-40°C to +85°C |
| Program Memory Size |
16K Flash |
| Data Memory Size |
512B RAM |
| EEPROM Data Memory |
256B |
| Oscillator Type |
Internal/External |
| Peripheral Modules |
ADC, Comparator, UART, SPI/I2C Master, CCP |
| I/O Pins |
11 |
| Clock Speed |
Up to 32 MHz with PLL |
| Low-Voltage Programming |
Yes |
| Power Consumption |
Low power consumption modes |
Instructions for Use
Power Supply:
- Ensure the supply voltage is within the operating range of 2.0V to 5.5V.
- Connect VDD and VSS pins appropriately.
Programming:
- Use a PIC programmer compatible with the ICSP (In-Circuit Serial Programming) interface.
- Follow the manufacturer’s guidelines for programming the device.
Oscillator Configuration:
- Choose between internal and external oscillators as per application needs.
- Configure oscillator settings using configuration bits during programming.
Peripheral Setup:
- Initialize peripheral modules (ADC, UART, etc.) in software using appropriate registers.
- Refer to the datasheet for specific register configurations.
Low-Power Modes:
- Utilize sleep mode and other low-power features to extend battery life in portable applications.
- Configure the watchdog timer if necessary for reliable operation.
Handling I/O Pins:
- Configure I/O pins as input or output based on your application requirements.
- Be cautious with pin states during power-up and reset conditions.
Development Tools:
- Use MPLAB X IDE and XC8 compiler for writing and compiling code.
- Simulate and debug code using MPLAB SIM or an external debugger.
For detailed specifications and advanced instructions, refer to the official Microchip Technology datasheet for the PIC16F1825T-I/ST.
(For reference only)
More detail about Utsource Holding Company Limited
