BTB24-800
BTB24-800

 

BTB24-800

Utsource Holding Company Limited flag
Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us
Visit Official Site Contact Us
Description

BUY BTB24-800 https://www.utsource.net/itm/p/12611270.html

Parameter Symbol Min Typ Max Unit Conditions
Repetitive Peak Off-State Voltage VDRM - 800 - V Tj = 25°C
Repetitive Peak Reverse Voltage VRRM - 800 - V Tj = 25°C
Non-Repetitive Peak Off-State Voltage VDSM - 1000 - V Tj = 25°C, Pulse Width ≤ 10 ms
RMS On-State Current (at case temperature) IT(RMS) - - 24 A Tc = 70°C
Average Rectified Output Current IOTAV - - 24 A Tc = 70°C, f = 50 Hz
Peak Recurrent On-State Current ITSM - 300 - A Tj = 25°C, Pulse Width ≤ 10 ms
Turn-On Time ton - 0.6 - μs di/dt = 10 A/μs
Turn-Off Time toff - 1.2 - μs di/dt = 10 A/μs
Gate Trigger Voltage VGT 1.5 - 3 V IG = ±1 mA, Tj = 25°C
Gate Trigger Current IG(T) 10 - 50 mA VGT = 2.5 V, Tj = 25°C
Holding Current IH - 5 - mA Tj = 25°C
Junction-to-Case Thermal Resistance RθJC - 0.9 - °C/W -

Instructions for BTB24-800:

  1. Voltage Ratings:

    • Ensure that the operating voltage does not exceed the repetitive peak off-state voltage (VDRM/VRRM) and non-repetitive peak off-state voltage (VDSM).

  2. Current Handling:

    • The device should not be operated beyond its RMS on-state current (IT(RMS)) or average rectified output current (IOTAV) ratings.
    • For transient conditions, observe the peak recurrent on-state current (ITSM) limits.

  3. Switching Characteristics:

    • Pay attention to the turn-on (ton) and turn-off (toff) times when designing switching circuits.
    • Use appropriate gate trigger voltage (VGT) and gate trigger current (IG(T)) values for reliable operation.

  4. Thermal Management:

    • Maintain the junction-to-case thermal resistance (RθJC) within specified limits to ensure proper heat dissipation.

  5. Installation and Handling:

    • Handle with care to avoid damage to the sensitive components.
    • Follow manufacturer guidelines for mounting and connections.

  6. Storage and Operating Temperature:

    • Store in a dry environment and operate within the recommended temperature range to prevent degradation of performance.

For detailed application-specific information, refer to the datasheet provided by the manufacturer.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Contact Us flag