Description
BUY CLY5 https://www.utsource.net/itm/p/12611307.html
| Parameter |
Description |
| Part Number |
CLY5 |
| Type |
Optocoupler |
| Configuration |
Single Channel |
| Forward Current |
IF = 20 mA (Max) |
| Forward Voltage |
VF = 1.6 V (Typical @ IF = 20 mA) |
| Reverse Voltage |
VR = 7 V (Max) |
| Collector-Emitter Voltage |
VCE = 70 V (Max) |
| Collector Current |
IC = 50 mA (Max) |
| CTR (Current Transfer Ratio) |
Min: 20%, Max: 400% @ IF = 5 mA, VCE = 5 V |
| Operating Temperature |
-40°C to +110°C |
| Storage Temperature |
-55°C to +125°C |
| Package |
DIP-4 |
Instructions for Use:
- Handling Precautions: Avoid exposing the device to excessive heat or mechanical stress during soldering and handling.
- Mounting: Ensure that the mounting orientation follows the pin configuration diagram provided in the datasheet.
- Electrical Connections: Connect the anode and cathode of the LED correctly to prevent damage. Ensure the collector and emitter connections are correct to avoid short circuits.
- Operating Limits: Do not exceed the maximum ratings specified in the table to prevent device failure.
- Storage: Store in a dry, cool place away from direct sunlight and sources of heat.
- Soldering: Use a temperature-controlled soldering iron and complete soldering within a recommended time to avoid thermal damage.
- Testing: Before installing into final applications, test the optocoupler using the specified parameters to ensure functionality.
(For reference only)
More detail about Utsource Holding Company Limited
