GWA80H65DFB: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating Condition	80	-	100	VDC
Output Voltage	VOUT	Steady State	65	-	-	VDC
Output Current	IOUT	Continuous Mode	-	2.5	3.0	A
Efficiency	η	Full Load	-	92	-	%
Switching Frequency	fSW	Normal Operation	-	100	-	kHz
Power Factor	PF	Full Load	-	0.95	-	-
Ripple Voltage	VRIP	Output	-	100	-	mVp-p
Temperature Range	TAMB	Operating	-40	-	85	°C

Installation:
- Ensure the device is installed in a well-ventilated area to prevent overheating.
- Use appropriate mounting hardware to secure the module.
Power-Up Sequence:
- Apply the input voltage (VIN) gradually to avoid inrush currents.
- Confirm that the output voltage (VOUT) stabilizes at the rated value before connecting the load.
Operating Conditions:
- Do not exceed the maximum input voltage or output current ratings.
- Monitor the temperature of the device, especially under full load conditions.
Maintenance:
- Regularly inspect connections and mounting points for signs of wear or corrosion.
- Ensure that the cooling system (if applicable) is functioning properly.
Troubleshooting:
- If the output voltage is unstable, check the input voltage and load conditions.
- Verify all connections are secure if the device does not start or shuts down unexpectedly.
Disposal:
- Follow local regulations for the disposal of electronic components.
- Recycle where possible to minimize environmental impact.

(For reference only)