TOSHIBA TLP250H(F): Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Forward Voltage	VF	IF = 10 mA	1.1	1.3	1.5	V
Reverse Breakdown Voltage	VBR	IR = 1 mA	5	-	7	V
Forward Current	IF	VR = 0 V	-	15	-	mA
Reverse Current	IR	VR = VBR	-	1	-	mA
Output Collector-Emitter	VCEO(s)	IC = 500 mA, TOPR = 25°C	-	30	-	V
Output Collector Current	ICM	VCES = 5 V, tW = 1 ms	-	1.5	-	A
Propagation Delay Time	tpLH	VINL → VIH, VOH = 1.4 V	-	1	2	μs
Propagation Delay Time	tpHL	VINH → VIL, VOL = 0.4 V	-	1	2	μs
Power Dissipation	PD	Ta = 25°C	-	625	-	mW
Operating Temperature	TOPR		-40	-	105	°C

Mounting and Handling:
- Ensure proper handling to avoid damage due to electrostatic discharge (ESD).
- Use appropriate tools and follow anti-static procedures.
Power Supply Connection:
- Connect the power supply ensuring correct polarity.
- Ensure the power supply voltage is within the specified limits to prevent damage.
Input Signal:
- Apply input signals within the rated forward current (IF) and ensure reverse voltage does not exceed the breakdown voltage (VBR).
Output Load:
- Connect the load to the output terminals ensuring the collector-emitter voltage (VCEO) and collector current (ICM) are within the specified limits.
Heat Management:
- Consider heat dissipation requirements, especially when operating near maximum power dissipation (PD). Use heatsinks if necessary.
Operating Temperature:
- Operate the device within the specified temperature range (-40°C to +105°C) to ensure reliable performance.
Propagation Delay:
- Account for propagation delay times in system timing design to ensure accurate operation.
Storage:
- Store in a dry, cool place away from direct sunlight and sources of heat.

(For reference only)