TDF8599TD/N1D

TDF8599TD/N1D

Category: Available (Qty:9999999)
For more information, visit our official website at utsource.us

Description

BUY TDF8599TD/N1D https://www.utsource.net/itm/p/12611493.html

Parameter Description Value Unit
Supply Voltage (VDD) Operating supply voltage range 2.7 to 5.5 V
Output Power Maximum output power per channel 3 W
Frequency Range Operating frequency range 144 to 174 MHz
Current Consumption Typical current consumption at 3.3V, 10mW output 80 mA
Audio Channels Number of audio channels supported 2
SNR (Signal-to-Noise) Signal-to-noise ratio 96 dB
THD+N (Total Harmonic Distortion + Noise) At 1kHz, 1W, 8Ω 0.05 %
Package Type Type of package TDFN-9
Operating Temperature Operating temperature range -40 to +85 °C

Instructions for TDF8599TD/N1D

  1. Power Supply Connection:

    • Connect the supply voltage (VDD) between 2.7V and 5.5V to the VDD pin.
    • Ensure a stable power supply with appropriate decoupling capacitors close to the device.
  2. Output Configuration:

    • The device supports two audio channels. Connect the output pins to the speakers or load impedance as specified in the datasheet.
    • For optimal performance, use an 8Ω speaker load.
  3. Frequency Settings:

    • Ensure that the operating frequency is within the range of 144MHz to 174MHz for proper functionality.
  4. Current Management:

    • Monitor the current consumption, which typically operates around 80mA at 3.3V with a 10mW output power.
  5. Thermal Considerations:

    • Keep the operating temperature within -40°C to +85°C. Ensure adequate heat dissipation if used in high-power applications.
  6. Signal Quality:

    • To achieve the best signal quality, maintain a signal-to-noise ratio of 96dB and ensure THD+N remains below 0.05%.
  7. Installation:

    • Install the device using the TDFN-9 package guidelines provided by the manufacturer. Ensure all soldering and mounting procedures are followed carefully to avoid damage.
  8. Testing:

    • After installation, perform testing under typical operating conditions to verify performance parameters like output power, SNR, and THD+N.

Refer to the specific application notes and detailed datasheet for more comprehensive guidance on using the TDF8599TD/N1D.

(For reference only)

More detail about Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited