BUY LTC6084CMS8 https://www.utsource.net/itm/p/12611608.html
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | Vsupply | Operating | 2.7 | 5.5 | V | |
| Input Offset Voltage | Vos | VI = 卤10V, TA = 25掳C | -1 | 0 | +1 | 渭V |
| Input Bias Current | Ib | VI = 卤10V, TA = 25掳C | -30 | 0 | +30 | pA |
| Input Voltage Range | Vcm | -40 | +40 | V | ||
| Output Voltage Swing | Vout | RL = 10k惟 to VSUPPLY | 0 | VSUPPLY-1.2 | V | |
| Slew Rate | SR | VIstep = 10V, CL = 10pF | 0.5 | V/渭s | ||
| Gain Bandwidth Product | GBP | 1 | MHz | |||
| Quiescent Current | IQ | VI = 卤10V, TA = 25掳C | 90 | 渭A | ||
| Power Supply Rejection Ratio | PSRR | f = 120Hz, TA = 25掳C | 110 | dB |
Supply Voltage: The LTC6084CMS8 operates within a supply voltage range of 2.7V to 5.5V. Ensure the power supply is stable and within this range to avoid damage or erratic behavior.
Input Signals: The input voltage range is from -40V to +40V. Care should be taken not to exceed these limits as it can lead to potential damage to the device.
Output Configuration: The output can swing from 0V up to the supply voltage minus 1.2V. For optimal performance, ensure the load resistance (RL) is set appropriately, typically recommended at 10k惟.
Slew Rate Consideration: With a typical slew rate of 0.5V/渭s, this op-amp is suitable for applications where moderate speed is required. Applications requiring faster response times may need additional considerations.
Power Consumption: Operates with a quiescent current of approximately 90渭A. This low current consumption makes it ideal for battery-powered devices.
Power Supply Rejection: The high PSRR of 110dB at 120Hz means that the device effectively rejects variations in the power supply, contributing to cleaner output signals.
Temperature Range: While not explicitly stated, ensure the device is operated within its specified temperature range to maintain reliability and performance.
Handling Precautions: Handle the device with care to prevent electrostatic discharge (ESD) damage. Use appropriate ESD protection measures during handling and installation.
Mounting: Ensure proper mounting on the PCB with adequate thermal management if necessary, especially in high-power or high-temperature environments.
For detailed specifications and more advanced configurations, refer to the official datasheet provided by the manufacturer.
(For reference only) More detail about Utsource Holding Company Limited
