MS62256L-70PC: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Description	Value	Unit
Package Type	Package style	SOP-28	-
Operating Voltage Range	Supply voltage range for normal operation	2.7 to 3.6	V
Standby Current	Current consumption in standby mode	20	μA
Access Time	Maximum access time	70	ns
Data Retention Time	Duration data is retained without power	10	years
Write Cycle Time	Time required for a write cycle	150	ns
Chip Enable Low Time	Minimum CE# low time for read or write	45	ns
Output Enable Low Time	Minimum OE# low time for read	15	ns
Write Enable Low Time	Minimum WE# low time for write	25	ns
Address Setup Time	Time addresses must be stable before CE# low	20	ns
Address Hold Time	Time addresses must be held after CE# low	5	ns
Data Setup Time	Time data must be stable before WE# low	15	ns
Data Hold Time	Time data must be held after WE# rising edge	5	ns
Power-down Mode Entry	Conditions to enter power-down mode	CE#=OE#=WE#=H	-
Power-down Mode Exit	Conditions to exit power-down mode	CE#=L	-

Power Supply Connection:
- Connect the supply voltage (VCC) within the operating voltage range of 2.7V to 3.6V.
- Ensure GND is properly grounded.
Signal Timing:
- Adhere to the specified timing parameters for address setup, hold times, and enable signals to ensure reliable data read/write operations.
Write Operations:
- For writing data, set the Write Enable (WE#) signal low after setting the address and data lines.
- Maintain the WE# signal low for at least the specified Write Enable Low Time.
- Allow sufficient Write Cycle Time before initiating another write operation.
Read Operations:
- Set the Chip Enable (CE#) and Output Enable (OE#) signals low to initiate a read.
- Ensure the address lines are stable before CE# goes low.
- Maintain OE# low for at least the Output Enable Low Time.
Power-down Mode:
- Enter power-down mode by setting CE#, OE#, and WE# high simultaneously.
- Exit power-down mode by bringing CE# low.
Handling:
- Handle with care to avoid electrostatic discharge (ESD).
- Follow proper storage and handling guidelines as per manufacturer recommendations.

Note: Always refer to the specific datasheet provided by the manufacturer for detailed specifications and application notes.

(For reference only)