BUY LMV358AID https://www.utsource.net/itm/p/12611662.html
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage Range | VCC | - | 2.7 | - | 5.5 | V |
| Input Offset Voltage | VIO | - | - | 1.0 | - | mV |
| Input Bias Current | IB | - | - | 40 | - | nA |
| Input Voltage Noise Density | en | f = 1 kHz | - | 9 | - | nV/√Hz |
| Slew Rate | SR | - | - | 0.6 | - | V/μs |
| Bandwidth | BW | - | - | 1.3 | - | MHz |
| Output Short-Circuit | - | Continuous to either rail | - | - | - | - |
| Quiescent Current | IQ | Per amplifier | - | 80 | - | μA |
Power Supply: Connect the supply voltage (VCC) between 2.7V and 5.5V to the appropriate pins. Ensure proper decoupling capacitors are placed close to the power supply pins to reduce noise.
Input Signals: Apply input signals to the non-inverting (+) and inverting (-) inputs. Be cautious not to exceed the common-mode input voltage range, which is typically from GND to VCC - 1.5V.
Output Configuration: The output can swing within a few millivolts of either supply rail, making it suitable for single-supply applications. For optimal performance, ensure the load resistance is within the recommended range.
Protection: The device has internal protection against output short circuits to either supply rail. However, avoid unnecessary stress on the device by limiting current through external components when necessary.
Temperature Considerations: Ensure that the operating temperature remains within the specified range to maintain performance parameters. Typically, this range is from -40°C to +125°C.
Layout Recommendations: Use a good PCB layout practice with short leads and proper grounding to minimize noise and interference. Place bypass capacitors close to the power supply pins.
Stability: To ensure stability, especially at higher frequencies, consider adding compensation components as recommended in the datasheet.
Note: Always refer to the official datasheet for the most accurate and detailed information about the LMV358AID.
(For reference only) More detail about Utsource Holding Company Limited
