BUK7226-75A: Top Choice in United States (USA) Utsource Holding Company Limited

Description

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Input Voltage	V_IN	4.5	-	28	V
Continuous Output Current	I_OUT_CONT	-	6	-	A	At T_C = 25°C
Peak Output Current	I_OUT_PEAK	-	12	-	A	Pulse Width < 30 μs, Duty Cycle < 1%
Thermal Shutdown Temperature	TSD	-	160	-	°C
Operating Junction Temperature	TJ	-55	-	150	°C
Storage Temperature	T_STG	-55	-	150	°C
Power Dissipation	P_DISS	-	-	4.7	W	At T_A = 25°C, θ_JA = 35°C/W

Power Supply Considerations:
- Ensure the input voltage is within the specified range of 4.5V to 28V.
- Use appropriate decoupling capacitors near the power supply pins to minimize noise and transient effects.
Current Handling:
- The device can handle a continuous output current of up to 6A at an ambient temperature of 25°C.
- For peak currents, do not exceed 12A for pulses shorter than 30μs with a duty cycle less than 1%.
Thermal Management:
- Monitor the junction temperature to ensure it stays within the operational range (-55°C to 150°C).
- Utilize heatsinks or other cooling methods if necessary to maintain thermal limits, especially under high load conditions.
Thermal Shutdown:
- The device has built-in thermal protection which will trigger at approximately 160°C. Ensure adequate ventilation and heat dissipation to prevent reaching this temperature.
Storage:
- Store the device in an environment where the temperature does not drop below -55°C or rise above 150°C.
Power Dissipation:
- Be aware that the maximum power dissipation is 4.7W at 25°C ambient temperature with a thermal resistance (θ_JA) of 35°C/W. Design your application considering these parameters to avoid overheating.
Handling Precautions:
- Handle the device with care to avoid static damage. Use anti-static wrist straps and mats when handling the component.

(For reference only)